Mora Knife Blade No. 1 Stainless

This is a stainless steel blade hardened to 56-58 Rockwell. The size and profile of this knife would make a great all-around utility knife.

Below are the detailed measurements of this blade:
  Overall Length: 7 inches (17.8 cm)
  Blade Length: 3.875 inches (9.8 cm)
  Blade Width: 0.68 inches (1.7 cm)
  Blade Thickness: 0.07 inches (1.8 mm)
  Blade Weight: 1 ounces (28 grams)
  Tang Length: 3.125 inches (7.9 cm)
  Tang Thickness: 0.07 inches (1.8 mm)
  Tang Width (At Blade): 0.45 inches (1.1 cm)
  Tang Width (At End): 0.16 inches (4.1 mm)
  Blade Material: stainless steel

Here are the fittings that this blade can be paired with, based on the sizes of the blade, tang, and slot. Any fitting labelled “might be too small/big” will still fit the blade, but might not be a good match depending on the style of knife that you’re making.

  Bolster 13mm x 18mm Brass Shaped: might be too small
  Bolster 13mm x 18mm Nickel Shaped: might be too small
  Bolster 16mm x 24mm Brass Shaped: might be too big
  Bolster 16mm x 24mm Nickel Shaped: might be too big
  Bolster 18mm x27mm Brass Shaped: might be too big
  Bolster 18mm x 27mm Nickel Shaped: might be too big
  Bolster 18mm x 35mm Brass Shaped: might be too big
  Bolster 18mm x 35mm Nickel Shaped: might be too big
  Bolster 19mm x 30mm Brass Shaped: might be too big
  Bolster 19mm x 30mm Nickel Shaped: might be too big
  Bolster 15mm x 22mm Brass Shaped: slot too wide, will need extra glue or solder
  Bolster 15mm x 22mm Nickel Shaped: slot too wide, will need extra glue or solder
  Ferrule 15mm x 23mm Brass Shaped: slot too wide, will need extra glue or solder
  Ferrule 15mm x 23mm Nickel Shaped: slot too wide, will need extra glue or solder